How to Install a Ghost Immobiliser
Ghost immobilisers are hidden security system that shields your car from key cloning and hacking. It works by preventing the engine of your vehicle from starting unless it is started using a PIN code, which can be as long as 20 characters.
This additional layer of security isn't visible to thieves who are unlikely to be expecting it. Certain systems come with an app that allows the owner to disable their immobiliser in the event of forgetting their PIN code or to use service/valet mode.
Connecting the vehicle's CAN Bus
The Ghost 2 Immobiliser, a cutting edge security system, can be incorporated directly into the ECU of your vehicle. It provides a discreet security barrier against thieves. It is highly efficient and user-friendly. This makes it a valuable asset to your vehicle's security arsenal. Like all anti-theft devices, it's not foolproof and requires regular maintenance to function properly. This guide will help you get the most of your Ghost 2 immobiliser.
CAN (Controller Area Network), a robust serial networking that allows microcontrollers to communicate with each other over small distances. A central control unit is not required. It is designed to allow multiplexing of electrical wiring inside vehicles to save on copper and comes with a variety of advantages, such as low cost and a simple use.
The CAN protocol is utilized in a majority of modern automobiles to connect with the engine management system, transmission controller, steering control module air conditioning controls and many more. It also relays information from sensors, such as speed sensors and other inputs, to control the vehicle's various features. The CAN bus is able to monitor the condition of these different components. It could stop the vehicle from starting if it's in an unsafe condition.
While the CAN bus could be employed for a variety purposes, it's important to understand how it operates and how it's secured. It is possible to add additional features to vehicles using CAN bus, but it's important to secure it against attacks from hackers and other dangers. Installing a firewall and monitoring your CAN bus with software is the best way to do this.
Ghost2's control unit is hidden within the dashboard of the car or in the wiring harness, preventing an intruder from physically altering it. It's also impossible to reset the PIN code or emergency code without access to the vehicle.
If you must give your car away to a valet parking service, maintenance or for any other reason, you can activate the Transport Mode. This feature disables both the keyfob as well as the ignition functions of the Ghost immobiliser. It will only reactivate after the car has reached 31 mph over a period of 15 minutes.
The process of creating an PIN code
The Ghost immobiliser is an effective security system that guards your vehicle from theft. The latest technology utilizes the PIN code to disable the engine and block it from starting without the correct code or an authorized fob/mobile device. The system's discrete design makes it virtually invisible and offers unrivaled security against theft. Moreover the system is TASSA verified and can result in significant savings on car insurance premiums.
During installation, Ghost enters a "learning mode" to record the sequence of buttons that are pressed to create unique pin codes. Once the pin code is created, the installer will then guide you through the process of activating the system. Once activated, the Ghost system will disable the motor that starts your vehicle until you enter a valid pin or switch the vehicle to transport mode. This makes it difficult for thieves or cloners to hack into or clone your vehicle's starter system.
It's easy to set up a Ghost immobiliser, however, you must follow the precise instructions included in the user guide to ensure that it is operating properly. Multimeters and hand tools can be used to check electrical values. Insulation tape and heat shrink tubing are a great way to shield the wire from damage and cable tie is essential to keep everything tidy and secure. Also, be certain to test the system on a regular basis to find any issues or potential errors.
It is crucial to test the system one more time before turning on the ignition. The Ghost immobiliser will arm itself after 3 to 30 seconds, based on the vehicle's model. It also has a Service/Valet mode that allows you to temporarily disable the system while you are servicing your vehicle or parking valet.
The immobiliser should be concealed in a hidden location beneath the steering wheel or dashboard. It is recommended to use a small amount of duct tape or paint to mark the CAN H and CAN L wires so that you can easily identify them when you are testing. Additionally, the CAN H and L wires should be connected to a source of power that is able to provide constant 12V. It is important to check the connections again after testing as the incorrect identification of these wires may cause the system malfunction.
Invoking the system
A ghost immobiliser prevents your car from starting when you press certain buttons on the vehicle, typically on the steering wheel, the door panel or the central console. The sequence is set by the user and can be changed as needed. Once the system is activated it is not able to be disabled by thieves, making it a good choice for anyone who wants to safeguard their vehicle from theft.
The system is not designed to be able to be detected by modern diagnostic tools and code-grabbing technology. what is a ghost immobiliser does not emit radio frequencies making it even more difficult for thieves to identify.
If the device is found, it will stop the engine from running. It will also sound an alarm to scare the thief away. The device can also be used to track the location of the car and assist police track it down if it is stolen.
Contact Car Specalist Customs for a estimate or to discuss your options if you're interested in Ghost immobiliser. We are fully qualified to install a ghost immobiliser on your vehicle and will ensure it is hidden in a remote area. We can also install additional security measures, including a kill switch and wheel lock, to protect your vehicle from theft.
Disarming the System
It is essential to know how to deactivate the Ghost immobiliser, if it's installed in your vehicle. This will aid you in the event that you lock your keys inside the car or if your battery goes out of. The system has a unique PIN code, which only you know. It won't be able to start the vehicle without this code. Pressing a combination button on the steering wheel or dashboard is the easiest method of entering your code. This is much easier than using a key fob, and stops others from copying your remote.
Contrary to other aftermarket immobilisers which require cutting wires for installation, Ghost2 is non-invasive and is compatible with your vehicle's bus network to operate. Its most notable feature is its ability bypass the engine without affecting your vehicle's normal functions, making it hard for thieves to make use of signal boosters or clone your car key. It doesn't emit radio frequency, so thieves cannot detect it.
The Ghost system has a Transport Mode which allows you to temporarily disable security for certain situations like transportation or service. This feature is ideal when you're lending your vehicle to someone else, without sharing your PIN code, or if your vehicle needs to be secured when you drive it. To activate Transport Mode, press the service button five times in a matter of 2 seconds. The Ghost system will confirm activation using five indication signals.
Save the emergency code in your vehicle in a secure location. Then, if you ever find yourself locked out of your vehicle, you can contact the technician or the company who installed the system, and they'll give you the code. If they are not able to contact you then you can attempt to contact an authorized dealer but this would require verification procedures and could incur additional costs.
This system isn't just useful, but it will also safeguard your vehicle from theft, and also reduce the cost of insurance. Many insurance companies offer lower monthly premiums or even financial incentives for installing this anti-theft system.